Skip to main content

Hanging decorations of hanging vase




I saw many hanging decorations when I visited people’s houses. I aroused some interest in these hanging decoration ideas. And I also come up with a small stuff but useful.




The hanging decorations below are braided out of cords. It can hang the fish tank on the wall which is quite different from what we always see in people’s house. Now let me show you my hanging decoration ideas.


What are the necessities?

 Wood circle
 Waxed cords
 Scissors
 Glue


How to make hanging decorations?



Step 1: braid the upper part :


Thread four pink cords to a wood circle.Upend a sky blue cord on the pink cords with the left end of cord short. Bring the right side cord over the left one; twine the pink cords by the right cord around for six times.

Step 2: braid the middle part :


Tie up the sky cord to fix the pattern. Cut the redundant; glue the cut place. Depart the pink cords to two parts; each part has four the pink cords to two parts; each part has respectively. Make a loop with right two cords; place the left two cords on the loop; thread the left two cords down to the right cords; bring the left two cords over to thread the hoop. Tie up the knot. Make the other part in the same way.


Step 3: the ending work :


Braid the same knot with two parts at a distance of about 5cm. make the ending as the same with the step 1 said. Cut off the sky blue cords and glue; leave the pink ones.Do you like the unique hanging decorations offish tank? You can be at ease that the hanging decoration ideas are quite safe as long as you choose better cords. Besides, more cords can bradded to be braided.









Comments

Post a Comment

Popular posts from this blog

Le domaine des pépinières au Maroc : un secteur en plein essor

Le secteur des pépinières au Maroc connaît une dynamique de développement remarquable, portée par une demande croissante en végétaux d’ornement, fruitiers et forestiers. Que ce soit pour des projets d’agriculture durable, d’aménagement paysager ou de reforestation, les pépinières marocaines s’imposent comme un maillon essentiel de la filière verte. Une croissance stimulée par des initiatives nationales Grâce à des programmes tels que le Plan Maroc Vert et la stratégie « Génération Green 2020-2030 », le rôle des pépinières est devenu stratégique. Le besoin en plants certifiés, robustes et adaptés aux conditions climatiques locales est en hausse. Cela pousse de nombreuses structures à innover, à l’image de Bauhinia Blanche , une pépinière certifiée située à Skhirat, qui conjugue savoir-faire local et techniques modernes de culture. Une expertise en pleine modernisation Les acteurs du domaine ne se contentent plus de produire des plants, ils s’impliquent dans l’aménagement global des espa...
Post a Comment
Read more

[Tips] How to caulk a bathtub!

[ decorative storage boxes ] : There are times when you would find yourself in a scenario wherein the joint between the tub and the wall of your toilet has opened up. And there is leakage. Thus it's time to do the process of caulking around the bathtub. Firstly, remove all loose material from the bathtub area and clean the area with rubbing alcohol. Then, remove the old caulk, either by softening it with a heat gun or by scraping out the old caulk with a sharp putty knife. If that doesn’t work, then use a hammer and a chisel. You can also use a solvent called the ‘ Caulk Remover ’ from any local hardware store or home improvement store. Follow the supplied instructions. After a couple of hours, the loosened caulk can be removed with a putty knife.                                     I...
Post a Comment
Read more

How to grout tiles and fit a door handle!

 How to fit a door handle : The second stage of hanging a new door is the fitting of the door handle, which is a job in itself! Firstly, the latch needs to be put in position at the middle of the door. Generally the bottom of the latch sits 1 metre above the floor. You will need : - Pencil - New door handle (latch, spindle and screws) - Drill and drill bits (including flat wood cutting bit) - Masking tape - Chisel Hold the latch in place at the 1m mark and at the centre of the edge of the door; mark its position with a pencil. Take your drill and flat wood cutting drill bit and place against the latch to measure the depth that you must go to whilst drilling. Use masking tape to mark this position and start drilling. Drill the hole into the side of the door and chisel out any debris. Next insert the latch, ensuring it is level, and mark around the entire latch. Use the chisel to scrape away the wood to create a shallow hole ...
Post a Comment
Read more